![iNDone](/img/default-banner.jpg)
- Видео 70
- Просмотров 320 211
iNDone
Добавлен 19 окт 2008
Light up Parmischinas - Part 8
The cabin at Parmischinas needs new lights. This series is about putting together some LED lights and prepare them for the 12 VDC (solar-)power available there.
Просмотров: 30
Видео
Light up Parmischinas - Part 7
Просмотров 95 лет назад
The cabin at Parmischinas needs new lights. This series is about putting together some LED lights and prepare them for the 12 VDC (solar-)power available there.
Old phone - Station 70
Просмотров 485 лет назад
Peek inside and cleaning of a old analog telephone from the 70ties.
Light up Parmischinas - Part 6
Просмотров 75 лет назад
The cabin at Parmischinas needs new lights. This series is about putting together some LED lights and prepare them for the 12 VDC (solar-)power available there.
Geekworm Game HAT unboxing
Просмотров 2015 лет назад
Unboxing of the Geekworm handheld game HAT for Rasperrypi.
Light up Parmischinas Part 5
Просмотров 65 лет назад
The cabin at Parmischinas needs new lights. This series is about putting together some LED lights and prepare them for the 12 VDC (solar-)power available there.
Andy repairs - Soda Stream
Просмотров 65 тыс.5 лет назад
Soda Stream disassemble and reassembled. Works normal again!?
Andy repairs - CarreraGo car repair and thoughts
Просмотров 145 лет назад
CarreraGo slotcar repair and thoughts.
Toy Repair - Pull back locomotive (no comment)
Просмотров 7605 лет назад
quick repair of a toy locomotive with a stuck pull back motor.
Light up Parmischinas Part 4
Просмотров 125 лет назад
The cabin at Parmischinas needs new lights. This series is about putting together some LED lights and prepare them for the 12 VDC (solar-)power available there.
iReview Xiaomi Mijia Wiha Screwdriver set
Просмотров 695 лет назад
Quick look at Xiaomi Mijia Screwdriver set
Light up Parmischinas Part 3
Просмотров 135 лет назад
The cabin at Parmischinas needs new lights. This series is about putting together some LED lights and prepare them for the 12 DC (solar-)power available there.
iReview - Gophert CPS-3205 II
Просмотров 1,5 тыс.5 лет назад
Quick look at the Gophert CPS-3205 II bench power supply
Impressions from Davos after heavy snowfall 01-15-2019
Просмотров 355 лет назад
Impressions from Davos after heavy snowfall 01-15-2019
Andy repairs - RC Kässbohrer finisher (no comment)
Просмотров 475 лет назад
Andy repairs - RC Kässbohrer finisher (no comment)
Dhigura - Fisherman's Village, South Ari Atoll, Maldives
Просмотров 12 тыс.13 лет назад
Dhigura - Fisherman's Village, South Ari Atoll, Maldives
Paradise Island - Vakarufalhi, South Ari Atoll, Maldives
Просмотров 20 тыс.13 лет назад
Paradise Island - Vakarufalhi, South Ari Atoll, Maldives
Thank you for the great teardown video - I was questioning the machine parts along with you all throughout the video! Got my machine all cleaned up and ready! 😊
❤❤❤❤
Let's face it.. You have no clue what you're doing and you're just having a crack at "fixing" something more by luck than design. Suggest you stay away from fixing anything electrical mate...
I'm stuck on step 2, which you did off screen
L'oxydent qui critique tant la Russie est bien contente d'utiliser ses helicos hyper performants...
That’s a pretty good video to disassemble and reassemble a sodastream play. I have one too and it has been in storage for a year. Now I can’t screw the gas bottle in anymore. After a few turns in it doesn’t go further and I can’t action it. I’ve tried to tear it down and back, but couldn’t solve the problem. Any idea?
안전제일안전에는최고가없다안전안전그래도마지막까지또안전제일...!!
Thanks for your in-depth tear-down of this Sodastream model. There's one or two things to be aware of. I could hear bits rattling around loose in mine, and the gas was coming out around the top of the plastic bottle. On pulling it apart I found 4 loose bits - a white plastic nut, a spring, and a white plastic plunger/jet, and also a longer plastic plunger with o-ring. I ascertained from another RUclips clip that the first 3 components formed part of the valve assembly with the blue plastic cap, but couldn't figure out where the other plunger went. Eventually worked out where it came from (the opposite end of the blue-cap valve) and realised this could have only dropped out during disassembly. Whilst not shown explicitly in this clip, it did help me identify where this part needed to go, so many thanks. If anyone has similar problems, use teflon tape when replacing the white spring-retaining nut and screw in very tight (pointy tweezers and pliers do the trick). Note that this repair does NOT require the degree of disassembly illustrated by this clip - don't go past the first 11 mins or so. If Sodastream published full exploded views of their various models, it would be helpful.....until then, won't be buying another one!
Andy! I am not the least bit handy, but I do own a screwdriver. This video (with much pausing/rewinding/pausing/rewinding again) helped me take apart a used SS, find the problem, and PUT IT BACK TOGETHER! very helpful and much appreciated.
Thanks Andy, my problem has now been rectified, your video gave me enough guidance to pull my SS Play apart. It was one of the relief valves, it had unthreaded itself which resulted in water being injected while gassing. Problem was how to get into this spot to fix it. This SS a difficult beast to work on, so thanks again.
Very nice dear i like it very mutch
MAASA ALLAH. 🙋♀️
Not good
If your Sodastream starts leaking gas as soon as you put in a new canister, look for the missing gasket. Had to take my Sodastream apart to find it laying inside the cover.
Thanks for this - taking it apart and reassembling worked - there was a tiny curled sliver of metal in fitting at end of hose - where the little cam opens the valve , don't know if this was the problem , it works again. Also put on teflon tape and that allowed me to have that fitting one thread further out for better contact with that cam. I appreciate your slow thorough method - although you left out butting the last two covers on - went back to beginning to see that,
silent vid?
Thanks a lot. You got me out of trouble with that tricky U-shaped bit!
I NEED FAZER ONE, WERE IS COMPONENTES PLEASE
I LAIK
Thank you
I ordered this I thought it was the whole game. What else do I need to order with it?
Трудяга.
The entire line of Sodastream are just POS plastic gadgets that are deliberately designed to break just out of warranty. Buy the most inexpensive model you can find, when it breaks after 2-3 years just trash it and buy another one.
Mine is years out of warranty so probably your first statement might be wrong. The second statement I wouldn't agree with either cause I don't like throw-away mentality.
We have this experience with sodastream. We have had 2 sodastream powers, the first one lasted 1 year before it broke, the second one worked for 1,5 years.
I’ve had mine for 8 years. No issues until this month. Will try to repair.
Thank you! I made an assumption that the component that presses on the canister wasn’t depressing properly. Your guide to disassemble the unit helped me get to that part and fix it... saved me having to buy a new one.
So, you fixed it by just disassemble and reassemble?
Kind of, yes. But because there was no broken part really I guess it was a loose connection, quite likely the nozzle that goes into the bottle. Works like a charme ever since.
Fixing something just by taking it apart and putting it back together is a real thing. When I was a Fax technician I lost count of how many machines came in that didn't work. I took them apart and couldn't find anything wrong with them and after I put them back together they worked just fine. So yes you can fix something sometimes just by taking it apart and putting it back together.
I don’t know why twenty people dislike this video This video is very helpful
I tried to wash it but I don’t remember how to repair it😂
Any idea where to get a replacement gasket for where the bottle goes into the machine?
This really helped me too. It’s so much easier to pull or bend a bit of plastic when you know that’s the right way to remove and you’re not just breaking it! Water was just shooting out through the head of the machine when I tried to carbonate it. And it’s out of warranty so I figured might as well see if I can fix it before spending money on a new one. I don’t know what you would call it but one of the little plastic assemblies with a spring inside attached to the tube and button mechanism had fallen apart. The part that’s blue with a white button thing on it in this video at 12:02, with the same thing but white on the other side - the white one is what had come apart in mine. Getting in there and screwing it back together fixed it. Now to see if it holds up or if I’m going to need to glue it into place. But it works for now.
Glad it helped you specially because it wasn't intended as how to video, rather a teardown.
@@iNDone helpful anyway. how to or not, I had what you didn't when you made this - the ability to rewind ten or so seconds and see where that random bit I just pulled out came from in the first place! Thanks :)
Same problem, the relief valve had come apart, lucky all the bits were found and put back - to stop it unscrewing again, I used a small length of Teflon tape on the thread, should hopefully work. These valves seem to be an issue with all SS, this model is a bugger to get work on.
@@geofmartin6125 Me three! Putting the little spring capsule back in place did the trick. My daughter helped me put the thing back together and a couple scenes from this video got us past some rough spots.
thank you, I have this model and it stopped working so your video helped me fix it
You're welcome, glad it helped, what was broken? I think the main cause with mine was just the loose nozzle.
@@iNDone I dont know, the pressure was really low when pressing it so I just took it appart and cleaned it all. I have it for 6 years now so the little pipes might have been a bit clogged up. Also the plastic part with the metal strip bit on it was all slimy compared to the rest i dont know what happened to it over the years
Красивая работа!
so how is it after month and half ? where did you buy it link pls ?! and was it worth ?
BEAUTIFUL
We are on a good land, am also from Aburi, thanks for sharing
If the Swiss get a little taste of the coaxial rotor system, they might start throwing rocks at tail rotors lol
KAMOV 32 POWERFUL MULTI TASK HELICOPTER
nice .i subscribed.
I am Montagnard indigenous I love shopping at farm market it’s fun to see many thing and walk around.
Ghana is very bad , army rubber scammer greedy leaders and the youth they are suffering. Kidnapping country
COSMIC MOTHER BLESSED U ALL EATING GOOD FOOD I MISS MY HOME TOWN. 🙏🙏💪💪🧘♂️🧘♀️💃
This is a great Ghana
Where, in Switzerland, is this??
Canton Schwyz
You just raped this video with that shitty tribe music...
Made in USSR!
Thank you for sharing your video, we film gopro walks through soulful cities mainly in Europe so it's lovely to see interesting places we may never get to go to. We really enjoyed absorbing the atmosphere and losing ourselves in the natural beauty.
.
The peoples the smells home is home
Very nice video! I have added your video to DiziVizi. Tag your other videos to DiziVizi for free and get more views. dizivizi.com/video/127136/aburi-garden-ghana.html
Sehr schöner Jubiläumsfilm.
Классное видео!
This is where haiti got its identity from. Out of all the caribean nations haiti is closed to Africa and we and I am proud. This is our mother land.